MasterVizionTechnologies
Book a walkthrough

Straight answer

Is this right for me?

  • You have paddle switches, dimmers or data jacks

    The wide opening takes rocker switches, dimmers, USB outlets and snap-in keystone jacks. It's the plate most current devices are built for.

  • You're finishing a network or AV drop

    This is what a Cat6 run ends at. Keystones snap straight in, so one plate can carry network, HDMI and speaker terminations side by side.

  • Mixing with the toggle plate

    Both Eaton plates share the same 4.87-inch mid-size height, so a decorator plate beside a toggle plate lines up top and bottom.

Overview

A decorator-style plate with the large rectangular opening that rocker switches, dimmers and snap-in keystone jacks all use. Same four colors and one-to-four gang range as the toggle plate, so you can mix both styles on one wall and still have the heights line up. This is the plate that finishes a network drop behind a TV or a rack.

Do I need professional installation for this?

Fine as a DIY plate swap. The reason to have us do it is when the cable behind the wall is ours to route — hiding a TV or camera feed cleanly is the fiddly part, not the plate.

Specifications

MaterialPolycarbonate
FinishGloss
MountingScrew mount
Height4.87 in (all gang counts)
Width3.12 / 4.94 / 6.75 / 8.56 in (1 / 2 / 3 / 4 gang)
Thickness0.080 in
Weight0.07 – 0.16 lb depending on gang count
ManufacturerEaton — PJ26 / PJ262 / PJ263 / PJ264 mid-size decorator wallplates
Size classMid-size (junior jumbo): 4.87" high across all gang counts, which covers a wider cut-out than a standard plate

What you'll also need

A box on its own is rarely the whole job. Here’s the honest rest of what makes it work — the integrator’s value, stated plainly.

  • A wall box or low-voltage mounting bracket behind it
  • Keystone inserts matched to your cable, if you're finishing a data drop
  • The switch, dimmer or outlet itself

Warranty & returns

Warranty

Eaton manufacturer warranty The warranty period begins on the date you receive the product. Our workmanship guarantee covers any installation we perform. Full terms on our Warranty page.

Shipping

Hardware ships to your door and shipping is calculated at checkout; installation, if you add it, is scheduled separately after a walkthrough. See Shipping & returns.

Returns

Unopened, unused hardware can be returned within 30 days of delivery in its original packaging, with a return authorization. Opened but undamaged hardware is subject to a 15% restocking fee. See Shipping & returns for the full policy.

What's in the box

  • Wall plate
  • Color-matched mounting screws

FAQ

How do I pay?

By card, online, through Stripe. You enter your card on Stripe's own secure page — your card number never reaches our site. We don't offer cash on delivery.

Do you charge sales tax?

Orders delivered to a Texas address are charged Texas sales tax at 8.25% — the 6.25% state rate plus 2% local — on the hardware subtotal plus shipping, because Texas taxes the delivery charge on taxable goods. Tax is shown as its own line before you pay. Orders delivered outside Texas aren't charged Texas sales tax.

Where do you ship, and what does shipping cost?

We ship to all 50 states and DC, from Dallas–Fort Worth. You pay the shipping at the carrier's live rate: at checkout we compare UPS, FedEx and USPS for your cart and address and show the cheapest carrier for each speed. There's no flat table and no free-shipping threshold, and the price you see is the price you pay.

How long will delivery take?

Dispatch is normally 1–3 business days. Then it's the carrier's transit time for the speed you choose: Standard is 3–5 business days, Express 2 business days, Overnight the next business day. A speed only appears if a carrier will actually do it for your address, and you get a tracking link by email the moment the label is bought.

Is my shipment insured?

Every shipment worth more than $500 is insured automatically for its value. It isn't an extra you tick — the insurance fee is already included in the shipping rate you see at checkout.

Why do projection screens ship by freight?

A projection screen travels flat and long, and a parcel carrier's handling is what damages them. So every screen — and the two kits that include one, the Projection Starter and the Media Room Package — ships by freight, never as a parcel. Within 80 miles of Dallas–Fort Worth we deliver it with installation; anywhere else, checkout offers a "Request a freight quote" form with your cart and address filled in, and we come back with a delivered price.

Do kits cost less than buying the parts separately?

Yes — every kit is 10% off the total of its parts. The saving shows on the kit page, in the cart and at checkout, and it applies while every part of the kit is in your cart. Discount codes don't apply to kits, since they already carry the kit saving.

What happens if something I ordered is out of stock?

We contact you. You choose between an equivalent alternative at the original price or a full refund for that item — we never substitute without asking.

Why is your camera more expensive than the same-looking one online?

Because it usually isn't the same camera. The housing can be identical while the sensor, lens, low-light behavior, and firmware support are not. We choose equipment we can stand behind for years and service locally, and we'll always tell you plainly what the cheaper look-alike gives up.

Can I supply my own hardware and have you install it?

Happy to. Bring the cameras, recorder, speakers, or gear you already own — if it's standards-compatible and in good shape, we'll design around it and install it properly. We'll tell you plainly at the walkthrough if a specific piece is holding the system back, but there's no obligation to buy your hardware from us.

Can I buy hardware from you without installation?

Yes. Anything in the shop is real hardware you can buy and take delivery of on its own — a single camera, a recorder, a drive, a speaker, a full kit. Professional installation is an option you add only if you want it, never forced.

Can I install it myself?

Absolutely. Everything in the shop is yours to install. Each product page gives an honest read on how hard the self-install actually is, and where having us do it is worth it — usually hidden cable, overlapping camera coverage, or anything going inside walls.

Can I mix hardware I already own with new hardware from you?

Yes. A new recorder with the cameras you already have, or new speakers on your existing wiring, is a common job. We check compatibility at the walkthrough so the parts actually work together.

Do I have to buy installation to get a walkthrough?

No. Walkthroughs are free and carry no obligation, whether you end up buying hardware from us, bringing your own, or deciding not to go ahead.

If I add installation to an order, what am I charged?

Installation isn't charged today. Aji quotes it after a free walkthrough. Adding it is a request, not a purchase — you pay for the hardware at checkout and nothing for installation until you've approved Aji's quote.

Chosen by how the system actually fits together, not by category.

  • Capture Advance

    IP Camera

    A network camera that takes power and sends video down one cable — the resolution to read a plate or recognize a face, not just see that something moved.

    • 5MP–8MP
    • PoE
    • install available
    from $279.99Details
  • Capture Advance

    Network Video Recorder (NVR)

    The box that powers your IP cameras over their network cable and keeps the footage — so there's something to look back at weeks later.

    • 8MP
    • 4CH–16CH
    • install available
    from $525.99Details
Left and right arrow keys scroll between 3 products. Home and End jump to either end.Showing group 1 of 1

Not sure it's the right piece?

Book a free, no-obligation walkthrough — we'll tell you exactly what your property needs before you buy a thing.

CallBook a free walkthrough